This regulator reduces the pressure from 50 to 30 mbar, for example, in an old 50 mbar system to operate new, built-in devices in 30 mbar. Is installed in the line in front of the device. On both sides cutting ring screw connection 8 mm.
Note: Only transitional solution, TüV tolerated! DIN DVGW tested.
Lieferumfang:
1 pressure reducer
connection:
8 mm RVS
2. Connection:
8 mm RVS
Controller output:
1.5 kg/h
Related links to "Pressure reducer from 50 to 30 mbar - 2 x RVS8"
